“?”
General Information[]
- All Component assembly creates 10 at a time.
Components[]
Titanium Alloy[]
“Titanium Alloys have high strength, low density with a high resistance to corrosion and extreme heat, ideal for use in aerospace applications.”
| Manufactory Level | Assembly Time 
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 1 | 55m | Carbon x150 Titanium x60 Iron x60 |
Stainless Steel[]
“An alloy of Iron, Stainless Steel is resistant to oxidation and much easier to clean than other similar metals, such as Aluminum and Copper.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 1 | 1h 5m | Carbon x120 Iron x70 |
Capacitor[]
“Capacitors are used to store electrical energy after accumulating electrical charges. Though most commonly containing two conductors, their designs vary based on their purpose.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 1 | 1h 10m | Iron x80 Titanium x60 |
Advanced Wiring[]
“Wiring is a key component in electronics, which are widely used in the modern era for a large variety of applications. As technology has evolved, wiring has become more advanced, allowing more streamlined and efficient uses in modern technology.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 2 | 2h | Thermic Brass x20 Plastic x100 Titanium x80 |
Stabilizer[]
“Stabilizers regulate and deliver a constant amount of voltage from an external input to a source, regardless of the incoming supply. These Components allow for efficient Manufacturing by conserving excess energy.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 2 | 1h | Thermic Brass x50 Iron x80 Titanium x20 |
Modular Support[]
“Though most commonly used to reinforce piping and electrical systems, support is required for advanced Manufacturing. Making these supports as efficient as possible allows for more refined and stable Munitions.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 3 | 1h 45m | Polycarbonate x120 Glass x60 Iron x40 Carbon x 60 |
Thermoplastic[]
“Thermoplastic is a plastic polymer that can be recast almost indefinitely. When frozen, Thermoplastic becomes similar to glass, though susceptible to fracturing. Any form Thermoplastic takes can be reversed, thus making the Component mechanically recyclable.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 3 | 2h 30m | Thermic Brass x20 Polycarbonate x120 Glass x50 Plastic x120 Carbon x150 |
Processor[]
“Also known as a Central Processing Unit, or CPU for short. CPUs are required for computing activities. Processors are used for both Munitions and the Manufacturing process.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 4 | 1h 40m | Fiber Mesh x20 Thermic Brass x20 Siliconite x120 Glass x20 Plastic x90 Titanium x40 |
Superconductor[]
“Superconductors create stable and high-intensity magnetic fields. Superconductivity allows large amounts of electricity to flow through matter, causing it to become a Superconductor with little to no resistance.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 4 | 1h 40m | Siliconite x90 Thermic Brass x30 Plastic x100 Polycarbonate x80 Fiber Mesh x40 |
Electroless Plating[]
“Electroless Plating is an autocatalytic process using chemicals to plate metals, as an alternative to doing so via electrical means. Through this process, a conductive surface is applied to a non conductive surface.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 5 | 3h 20m | Biofoil x20 Polycarbonate x70 Titanium x60 Glass x60 Iron x100 Fiber Mesh x30 |
Bioplastic[]
“Biodegradable plastics are made from renewable resources such as vegetable oils and food waste. Bioplastic plays a similar role to normal plastic, but with a unique and less dependent Assembly requirement.”
| Manufactory Level | Assembly Time
|
Production Cost | Required For |
|---|---|---|---|
| Materials | Munitions | ||
| 5 | 2h 30m | Biofoil x40 Fiber Mesh x30 Plastic x120 Siliconite x100 Carbon x140 |
Boosts[]
Council Committees[]
- ?
Council Councilors[]
- ?
Library Technology[]
- ?
Parliament Laws[]
- ?
Seasons[]
- ?
University[]
- Ransom E. Olds
- Component Material Cost: Decreases the amount of Materials needed to craft Components in the Manufactory by 5%
Wonders[]
- ?
VIP Bonuses[]
- ?
Others[]
- ?
Link[]
- https://forums.bighugegames.com/index.php?threads/the-manufactory.29285/
- https://forums.bighugegames.com/index.php?threads/dominations-update-12-1-manufactory-arrives.29381/page-2#post-193497
| DomiNations Wiki Navigation | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Alliances • Artifacts • Blessings • Chest • Coalitions • Councilors • Detachments • Great Leaders • Events • Gameplay Mechanics • Leagues • Mercenaries • Multiplayer • Resources • Single Player Campaigns • Tactics • Technology • Troops • Troop Tactics • Wildlife • World War • Fan Contributions | ||||||||||||
| ||||||||||||
| ||||||||||||